Vijay Laxmi Enterprises
Jhotwara, Jaipur, Rajasthan
GST No. 08DJMPD0700E1ZR
Call 07942545901 90% Response Rate
Send Enquiry
Sika Cement Grout
SikaRep MicroCrete-4 30 Kg
Product Brochure
| Packaging Type | BOPP Bags |
| Packaging Size | 30 Kg |
| Usage/Application | Construction |
| Color | Gray |
| Brand | Sika |
| Material | Microconcrete |
| Country of Origin | Made in India |
SikaRep® Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement.
A properly designed concrete which can be pumped of poured into restricted.- Placement without any vibration.
- Expansion system compensates for shrinkage settlement in plastic stage.
- Easy to mix and apply, high flow characteristic, rapid strength development,
- Overview
- Product Details
- Application
- Documents
- Columns
- Beams
- Slabs, etc.
- Placement without any vibration.
- Expansion system compensates for shrinkage settlement in plastic stage.
- Easy to mix and apply, high flow characteristic, rapid strength development,
- Good bond with old concrete.
- Contains no added chloride.
30 kg bags
ColourGrey powder
Product DetailsSustainability / Certifications / ApprovalsAPPROVALS / STANDARDSASTM C1107
Product InformationTechnical InformationApplicationApplication InformationMixing RatioWater: Powder = 0.14 to 0.16 by weight (4.2 l to 4.8 l water per 30 kg bag) dependent on the desired flow.
Mixing time should be minimum 5 minutes.
ConsumptionApplication stepsDocuments SikaRep® Microcrete-4Product Data Sheet (PDS)PDF - 367 KB (EN)Additional Information:
- Packaging Details: 30 Kg bag
View Complete details
Sika Chapdur
Minimum Order Quantity: 50 Bag
Product Brochure
| Brand | Sika |
| Usage/Application | Construction |
| Packaging Size | 30 Kg |
| Type | Floor Hardener |
| Thickness | 100 mm |
| Shelf Life | 6 Months |
Sika® Chapdur IN is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur IN provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.
- Ready to use
- Good wear resistance
- High impact resistance
- Overview
- Product Details
- Application
- Documents
- Warehouses
- Factories
- Shopping malls
- Public areas
- Restaurants
- Museums
- Parking lots
- Garages and Service stations
- Ready to use
- Good wear resistance
- High impact resistance
- Cost effective surface hardener
- Makes floor dust proof
- Non metallic and rust free
- Easy to clean
- Increased resistance to oils and grease
- Quality assured factory blending
- Suppresses superficial fibres in concrete
30 kg bags
ColourNatural concrete grey powder
Product DetailsProduct InformationChemical Base
Natural mineral aggregates graded and mixed with cement, admixtures and pigments
Shelf Life
12 months from date of production
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10 °C and +30 °C
Bulk Density
1.5 ± 0.1 kg/L at +27 °C
Technical InformationApplicationApplication InformationLayer Thickness
2.5–3.0 mm at dosage of ~5.0 kg/m2
Ambient Air Temperature
+5 °C min. / +35 °C max.
Relative Air Humidity
30% min. / 98% max.
Substrate Temperature
+5 °C min. / +35 °C max.
Applied Product Ready for Use
| Foot Traffic | Fully serviceable |
| ~72 hours | ~7 days |
The above values are at substrate temperature of +27 °C and dependant upon the concrete reaching its design strength for serviceability and will be affected by changing ambient conditions, particularly temperature and relative humidity.
ConsumptionApplication stepsDocuments Sika® Chapdur (IN)Product Data Sheet (PDS)PDF - 289 KB (EN)View Complete details
Sika Block Jointing Mortar
Minimum Order Quantity: 50 Kg
| Brand | Sika |
| Usage/Application | Block Jointing |
| Packaging Size | 30 Kg |
| Material | Cement |
| Shelf Life | 6 Month |
| Density | 1.33 Kg/L |
Ready to use grey cement based non-shrink, self- curing mortar for fixing AAC blocks, Concrete blocks, fly ash bricks etc.
- Ready to use, only water to be added.
- Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
- Better bond than conventional cement based mortar
- Overview
- Product Details
- Application
- Documents
- Ready to use, only water to be added.
- Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
- Better bond than conventional cement based mortar
- Faster to apply due to good spreadable properties.
- Excellent high strength & water retention properties
- Economical as quantity of mortar is less than conventional mortar
- Self-curing.
30 kg bag
ColourGrey powder
Product DetailsProduct InformationChemical BaseCementitious mortar modified with polymers.
Shelf Life6 months from date of production
Storage ConditionsStored properly in original unopened, sealed and undamaged packaging in dry and cool conditions.
DensityBulk Density : ~1.33 kg/l (at +27°C)
Technical InformationApplicationApplication InformationLayer Thickness3-4 mm
Ambient Air Temperature+5°C min. / +45°C max.
Substrate Temperature+5°C min. / +45°C max.
Pot Life90 minutes
ConsumptionApplication stepsDocuments Sika® Block Joining MortarProduct Data Sheet (PDS)PDF - 266 KB (EN) Follow us- Construction
- Automotive & Industry
- Concrete Technology & Admixtures
- Contact us
- Locations
- Careers
Plot No D 101/2,MIDC Industrial Area
Additional Information:
- Packaging Details: 30 KG Bag
View Complete details
EXPLORE MORE CATEGORIES